Hello, I'm trying to get my Cinergy 400 TV mobile (PCMCIA!) to work. It's equipped with a SAA7133 chip, which is recognized by the saa7134 kernel module. The card was not autodetected, so I added a new card in saa7134-cards.c, for experimenting I just copied the entry of the Cinergy400 PCI card and added it at the end of saa7134_boards[]: [SAA7134_BOARD_CINERGY400M] = { .name = "Terratec Cinergy 400 TV mobile", .audio_clock = 0x00200000, .tuner_type = TUNER_PHILIPS_PAL, .inputs = {{ .name = name_tv, .vmux = 1, .amux = TV, .tv = 1, },{ .name = name_comp1, .vmux = 4, .amux = LINE1, },{ .name = name_svideo, .vmux = 8, .amux = LINE1, },{ .name = name_comp2, // CVideo over SVideo Connector .vmux = 0, .amux = LINE1, }} } Then, I added an entry at the end of saa7134_pci_tbl[]: { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, .subdevice = 0x1162, .driver_data = SAA7134_BOARD_CINERGY400M, } And the define in saa7134.h: #define SAA7134_BOARD_CINERGY400M 34

case SAA7134_BOARD_CINERGY400M: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000); break; } return 0; }